9.
You may choose to connect an IR source to the advoli
TM
TB6 Standard graphics
card in the ‘IR in’ socket, or an IR emitter to the ‘IR out’ if you plan on using the IR pass
through capabilities of the graphics card.
10.
Close the computer casing/panel once you have completed the installation of the advoli
TM
TB6 Standard
graphics card.
11.
It is advised to use an already existing HDMI/VGA connector on the motherboard with a paired monitor
to setup the driver for the graphics cards. If you do not setup the driver before use of the graphics card, it
may not work on some motherboards until you have done so. Please ensure you install the driver before
proceeding to step 12 below.
12.
You will need to have CAT 5e/6/7/+ cables in at least one of the six RJ45 sockets with a HDBaseT
TM
certified display or HDBaseT
TM
certified receiver connected to a display in order to use the HDBaseT
TM
certified advoli
TM
TB6 Standard graphics card. You may use all six RJ45 sockets paired with their own
display respectively. It is advised to use HDBaseT
TM
certified receivers to ensure compatibility. We highly
recommend the advoli
TM
HDBaseT RB1 Standard receiver for guaranteed compatibility.
TA6P-V2-12-09-2018
Page
of
10
22
IR Out
IR In
HDBaseT
TM
Output
Each RJ45 port can deliver 4K
resolution video, audio, controls
(RS232, IR, CEC), 3Dsync and
receive diagnostics.
TM