VP-8-V2 and VP-16-V2 Series Encoder
·
User Manual
42
I Frame Interval:
Set the I frame interval from 1 to 400 (frames). The higher value results in lower video
quality.
Video Encoding:
Select the video encoding standard.
When the MJPEG video encoding standard is selected, the frame rate can be set to 1~15fps and the max.
bitrate is not configurable.
5.
If you want to copy the display settings of the current camera to other cameras, spread the
Copy to Camera
panel and select the camera(s) to copy, or click
Select All
to select all cameras.
Figure 5. 8
Copy to Camera
6.
Click
OK
to validate the above settings.
5.3
Configuring and Handling Alarms
Purpose:
This section explains how to configure the network camera to respond to alarm events, including Motion
Detection, External Alarm Input, Video Loss, Tamper-proof and Exception. And the alarm events can trigger the
alarm actions, such as Notify Surveillance Center, Send Email and Trigger Alarm Output.
5.3.3
Configuring Motion Detection
Motion detection is a feature which can alert the personnel and record the video for the motion occurred in the
surveillance scene.
Steps:
1.
Set the Motion Detection Area
Steps:
(1)
Click
Remote Configuration> Camera Settings> Motion Detection
to enter the motion detection
settings interface.
