VP-8-V2 and VP-16-V2 Series Encoder
·
User Manual
11
Chapter 2
Access to V2 Encoder via Web
Browser
Steps:
1.
Power on the encoder, and connect the encoder to the network.
2.
Input the IP address into the address bar of the web browser, and click Enter to enter the activation
interface.
The default IP address of the network encoder is 192.0.0.64. You are recommended to change
the default IP address after your access.
3.
Default username is
admin
Default password is
12345
.
The VP-8-V2 AND VP-16-V2 can also be accessed by WEB Browser for configuration and operation. The supported
WEB browsers include: Internet Explorer 6/7/8/9, Firefox 3.5 and above, Chrome 8 and above, Safari 5.0.2 and
above, Windows XP SP1 and above (32-bit).
Before you start:
Before access, you need to configure the network settings of device according to
Chapter 3
.
Connect the device to the LAN, and prepare a PC connected to the same LAN with the device.
The factory default IP address of the device is
192.0.0.64
.
2.1
Installing Web Components
Steps:
1.
Open WEB browser, input the IP address of VP-8-V2 AND VP-16-V2 (e.g.,
http://192.0.0.64) and then press
the
Enter
key on PC. The system will display the login interface.
When the HTTPS feature is enabled, the system uses the HTTPS login mode (e.g., https://192.0.0.64) by default.
You can also input http://IP address/index.asp (e.g., http://192.0.0.64/index.asp) if you want to use HTTP mode to
log into the device.
