29
Camera mounting
Installation shall be conducted after turning off each device.
1
Attach the attachment plate (accessory) on the ceiling or wall.
<Using a two-gang junction box>
Secure the attachment plate (accessory) to the two-gang junction box (locally procured). (
☞
Pages 18)
2
Connect each cable. (
☞
Page 24) Waterproof the connecting portion. (
☞
Page 27)
3
Using the attachment plate position marker as a guide, match the “OPEN” position of the cam-
era to the projection of the attachment plate (accessory).
4
Engage the attachment plate fixing screws on the rear of the camera in the camera mounting holes
of the attachment plate (accessory), and then rotate the camera in the direction of the arrow to
secure the attachment plate and camera while storing the cables in the rear of the camera.
Rotate the camera until a click is heard so that the projection of the attachment plate (accesso-
ry) will be set to the “LOCK” position.
5
Secure the camera with the camera fixing screw on the front view.
(Recommended tightening torque: 1.37 N·m {1.01 lbf·ft})
IMPORTANT:
•
Ensure that the camera fixing screw is firmly secured.
Failure to observe this may cause a malfunction or the product to fall, resulting in injury or
accidents.
Installation
Projection
Camera mounting hole
Attachment plate position marker
Attachment plate fixing screw
Camera fixing screw
<Front view>
