Adventys WOEC 3600, Инструкция по использованию

Страница: 22 / 36

22
You have doubts about whether your induction hob is working correctly. This does not necessarily mean there is a break-
down. Nevertheless, check the following points.
In all events, if your intervention proves insufficient, contact the After-Sales Service immediately.
Troubleshooting.
WHAT SHOULD YOU DO? POSSIBLE CAUSES
Contact the After-Sales Service.
Use a compatible pan (see list provided).
This is normal.
The electronic circuits have broken down.
The pan you are using is not suited to induction cooking.
Cooling the electronics.
Check the electrical installation. Inspect the fuses and the circuit
breaker. The appliance is not being supplied. The electricity supply or the
connection is faulty.
YOU NOTICE THAT…
The wok does not work.
When you turn the induction wok on the indicator lights on the key-
board keep flashing.
The ventilation continues for a few minutes after the wok has been turned
off.
This is normal. Automatic testing of product.
Just after being connected, the ventilation comes on for a few seconds.
The induction wok is not working. The indicator lights on the key-
board do not light up.
Check the conformity of your installation and especially the air in-
lets and outlets, as indicated in the instructions.
The electronic circuits are over heated.
The induction wok stopped working during cooking.
The timer may indicate the message
In the event of a fault, note down the message given by the timer and refer to the fault chart.
Do not be surprised if the glass surface of your wok is always slightly warm. This is normal.