Adventurer LP Eagle Cap, Руководство пользователя

Страница: 18 / 39

T
RUCK
C
AMPER
O
WNER
’
S
M
ANUAL
© ALP (Adventurer Limited Partnership). 14 All Rights Reserved
LOADING & UNLOADING YOUR CAMPER
There are presently two types of jacks used on our truck campers. They are New Generation Happi-
Jac (manual) and New Generation Happi-Jac (electric) with wireless remote control.
Load and Unload Your Camper on level ground, never on an obvious grade.
Dually Brackets
SWING-OUT BRACKETS (OPTIONAL)
To load or unload campers on dual rear wheel trucks, swing-out brackets will need to be installed on
the front jacks to clear the duallys/fender. To operate, follow the steps below:
1. Lift jack from the travel notch locked position and swing outward from the camper body.
2. Position jack so when camper jack is lowered, the notch and raised tab engage to prevent
rotation.
3. Repeat the process for the other front mounted jack.
4. Follow the standard camper loading and removal procedures below.
Manual Jack Operating Instructions

Remove dust cap and pull Release locking
lever to the “unlocked” (Down Position) at top
WARNING:
USE EXTREME CAUTION WHEN UNLOADING YOUR CAMPER IN A STRONG WIND
CAUTION: When unloading your camper, be sure
all tie downs and electrical connections are
disconnected.
Manual Screw Jack Electric Screw Jack & Wireless Remote
Locked Unlocked