Adventurer LP Eagle Cap, Руководство пользователя

Страница: 29 / 39

T
RUCK
C
AMPER
O
WNER
’
S
M
ANUAL
© ALP (Adventurer Limited Partnership). 25 All Rights Reserved
Pressure Temperature Relief Valve
Drain Plug

Open hot and cold water faucets, open the low point drain valves on HOT and COLD water
pipes.

Drain the water heater by opening the drain valve at the bottom of the heater and open the
safety valve. Open the hot water faucets.

Open all cold water faucets, and depress the flush pedal
or pull the flush levers on the toilet. When each faucet
has been opened, drained, and closed, close the water
line drain valves, and fresh water tank drain valve.

Drain the showerhead by opening the valve. Let all water
drain out the tub spout. Leave the valve open.

Be sure ALL water from ALL plumbing fixtures has been drained.

If your unit is equipped with a water heater
bypass valve, close the valves to by-pass heater
tank.

Make sure fresh tank drain valve is closed. Pour
one gallon of RV approved non-toxic anti-freeze
into the fresh water tank.

Turn the water pump master switch to ON and
run pump through galley faucet for 20 seconds.

Turn the water pump master switch to off.

Drain approximately one cup of anti-freeze from fresh water tank drain, cold low point drain,
and hot low point drain.

Insert the hose from the winterizing valve into a container of RV approved non-toxic anti-
freeze.

Turn the valve to have the pump pick up from hose.
By-Pass Mode Normal Flow