Advent Instruments AI-5120, Руководство пользователя

Страница: 29 / 32

Appendix B: Error Codes
Various AI-5120 error conditions may be detected at power on or during operation. If
such a condition is detected, the "Ready" indicator starts to flash from its normally solid
on state. The type of error detected is determined by examining the state of the "Ringing"
and "Off-Hook" indicators. The following table lists the various error conditions.
READY
Indicator
RINGING
Indicator
OFF-HOOK
Indicator
Description / Corrective Measure Error
Code
Flashing On On RAM Test Failure:
Upon power on a check of the system RAM is
performed. This error code indicates that one
or more data bytes did not pass the check.
As this represents a hardware fault, the only
corrective action is to return the unit for repair.
1004
Flashing On Flashing Flash Memory Corruption
Can Not Load Calibration:
The calibration factors are missing from the
flash memory or are corrupted.
If the Ai5120Update.exe program has been
used at least once after the last calibration,
execute it again. It should be able to restore
the missing data. If not, please contact
technical support for assistance.
1005
Flashing Off Off Flash Memory Corruption
No Program File:
The primary DSP application program is
missing from the flash memory or is corrupted.
Use the Ai5120Update.exe program to restore
the flash memory contents.
n/a
Flashing Flashing Flashing
Flash Memory Corruption
No Startup Script File:
The startup script file is missing from the flash
memory or is corrupted.
Use the Ai5120Update.exe program to restore
the flash memory contents.
1008
Flashing Flashing Off Flash Memory Corruption
Missing Unit ID Code:
The unit ID code stored in the flash memory is
either missing or is corrupted.
If the Ai5120Update.exe program has been
used at least once after the last calibration,
execute it again. It should be able to restore
the missing data. If not, please contact
technical support for assistance.
1006
Flashing Flashing On
Flash Memory Corruption
Missing Parameter Data File:
The parameter data file is missing from the
flash memory or is corrupted.
1007
AI-5120 User Guide 25