Advantek Networks AWR-MIMO-54RA страница 5 Скачать руководство пользователя

Страница: 5 / 58

1. Introduction

This Four ports MIMO Wireless Broadband Router is a full-featured wireless broadband

router that establishes wireless connection from AP then provides direct connection to local

area network or individual PC with build-in 4-port switch. This gateway uses advanced

broadband router chipset and wireless LAN chipset solution let you enjoy high-speed Wired

and Wireless connection. Simply connect this gateway to a cable or DSL modem and then you

can share your high-speed Internet access with multiple PCs at your home. This gateway also

creates a secure Wired and Wireless network for you to share photos, files, video and so on.

This gateway provides maximum transfer rate up to 90 Mbps from WAN to LAN, 100

Mbps from LAN to LAN and 11/54 Mbps through wireless channel. Built-in DHCP server

automatically to assign IP addresses to all workstations on your LAN. It supports the advanced

wireless security WPA and WPA2 standards to guarantee the best security for users. It also

has firewall and NAT function to help prevent potential attacks from the Internet.

1.1 Features

Internet Access Features

•

Shared Internet Access: All users on the LAN or WLAN can access the Internet

through the Wireless Router, using only a single external IP address. The local

(invalid) IP addresses are hidden from external sources. This process is called NAT

(Network Address Translation).

•

DSL and cable modem Support: The Wireless Router has a 10/100BaseT Ethernet

WAN port for connecting a DSL or cable modem. All popular DSL and cable modems

are supported.

Содержание AWR-MIMO-54RA



























































Результаты поиска

Содержание AWR-MIMO-54RA

Отзывы:

Похожие инструкции для AWR-MIMO-54RA

Бренды по названию

Популярные бренды

Advantek Networks AWR-MIMO-54RA, Руководство пользователя

Результаты поиска

Содержание AWR-MIMO-54RA

Отзывы:

Похожие инструкции для AWR-MIMO-54RA

Бренды по названию

Популярные бренды