Advantek Networks AWR-MIMO-54RA Скачать руководство пользователя страница 48

Страница: 48 / 58

domain it will operate with.

Authentication Type:

Allow user to select Authentication Type. The choice has Open System,

Shared key, and Auto.

Beacon Period:

This value represents the time interval between beacons broadcast by the

AP.

RTS Threshold:

This value represents the minimum size of data frames above which

Request-To-Send (RTS) protocol is used. RTS helps to prevent data collision from hidden

nodes.

Fragmentation:

For efficient high-traffic situations, large files are split into fragments. This

parameter specifies the default packet size.

DTIM Period:

This parameter specifies the number of beacon intervals between successive

Delivery Traffic Indication Maps (DTIMs).

Basic Rate Set:

Basic data transfer rate.

Control Tx Rates:

The value is between 1Mbps to 54Mbps.

CTS Protection:

CTS Protection Mode boosts your gateway's ability to intercept Wireless-G

and 802.11b transmissions. Conversely, CTS Protection Mode decreases performance.

Preamble:

Either Short (72 bits) or Long (144 bits).

Tx Burst:

This setting allow user to enable or disable Tx Burst.

Packet Aggregation:

This setting allow user to enable or disable Packet Aggregation.

Antenna:

User can choose different Antenna setting which as Diversity, Antenna 1, or

Antenna 2.

Содержание AWR-MIMO-54RA



























































Результаты поиска

Содержание AWR-MIMO-54RA

Отзывы:

Advantek Networks AWR-MIMO-54RA, Руководство пользователя, Страница: 48 / 58

Результаты поиска

Содержание AWR-MIMO-54RA

Отзывы: