Button/port Description
DC IN
Connect with DC Power Adapter.
Reset
Reset configurations to default. Press the button and hold for 10
seconds.
WPS
Click WPS button about 2-3 seconds while you are connecting a PC of
wireless adapter with WPS function (you must enable WPS’ PBC
function).
LAN
(1x, 2x, 3x, 4x)
Connect LAN systems with RJ-45 cable.
WAN
Connect DSL or Cable modem.
1.4 System Requirements
Before installing the Wireless Router, ensure that your system/network meets he following
requirements:
‧
One or more PCs (desktop or notebook) with Ethernet interface.
‧
TCP/IP protocol must be installed on all PCs.
‧
Have valid Internet Access account and a DSL or cable modem.
‧
10Base-T/100Base-TX network cables with RJ-45 connectors.
‧
In case to use Wireless Access Point, all Wireless devices must be compliant with
IEEE 802.11b/g.
‧
System with MS Internet Explorer ver. 6.0 or later version
1.5 Before you proceed
Take note of the following guidelines before installing the Wireless Router:
‧
The length of the Ethernet cable that connects the device to the network (hub,
ADSL/cable modem, router, wall patch) must not exceed 100 meters.
‧
Place the device on a flat, stable surface as far from the ground as possible.
‧
Keep the device clear from metal obstructions and away from direct sunlight.
‧
Keep the device away from transformers, heavy-duty motors, fluorescent lights,
microwave ovens, refrigerators, and other industrial equipment to prevent signal loss.
‧
Install the device in a central area to provide ideal coverage for all wireless mobile
devices.
8
