Advantech UNO-2372G V2 Скачать руководство пользователя страница 14

Страница: 14 / 50

UNO-2372G_V2 User Manual

1.1

Introduction

Advantech's new UNO-2 series serve as modular Integrated Edge Controllers. They

provide configuration flexibility for customers seeking to cost effectively optimize their

services. The new integrated Din-rail mounting kit is designed to be more ruggedized

and user-friendly, making it a perfect fit for control cabinets.
This new UNO-2372 V2 model features a ruggedized design with an industrial-grade
Intel Celeron

J6412 2.0GHz, and 4GB or 8GB DDR4 RAM. It supports wide tem

perature range operation (-20 ~ 60° C/-4 ~ 140° F) and sufficient I/O - including 2 x

LAN, 3 x USB 3.2, 1 x USB2.0, 1 x HDMI 1.4, 1 x DP 1.4, 4 x COM, 1 x 2 pin terminal

block. It also supports 1 x full-size Mini PCIe slot (PCIe/USB2.0 signal) to enable

expansion. An optional 2nd stack extension kit supports 2 x iDoor module, such as

industrial Fieldbus, as well as I/O and peripheral modules. This expandability makes

Advantech’s UNO-2 series an excellent choice for various industrial applications.

Additionally, UNO-2's flexible expandability and control functions meet emerging

demands for industry 4.0.

1.2

Safety Precautions

Below are a few safety precautions for preventing injury when making connections. In
most cases, users can use a standard cable for connection.

Warning!

Always disconnect the power cord from the chassis before manual han-

dling. Do not connect the chassis while the system power is on. A sud-

den rush of power can damage sensitive electronic components. Only

experienced electronics personnel should open the chassis.

Warning!

Toujours à la terre pour éliminer toute charge d'électricité statique avant

toucher UNO-2372G V2. Appareils électroniques modernes sont très

sensibles à charges d'électricité statique. Utilisez un bracelet antista

tique à tout moment. Placez tous composants électroniques sur une

surface antistatique ou dans un statique-sac blindé.

Caution!

Always ground yourself to remove any static electric charge before

touching UNO-2372G V2. Modern electronic devices are very sensitive

to static electric charges. Use a grounding wrist strap at all times. Place

all electronic components on a static-dissipative surface or in a static

shielded bag.

Caution!

Toujours débrancher le cordon d'alimentation de votre boîtier lorsque

vous êtes travailler. Ne branchez pas lorsque l'appareil est allumé. Un

afflux soudain de puissance peut endommager les composants électro-

niques sensibles. Seulement connu personnel de l'électronique

devraient ouvrir le châssis.

Содержание UNO-2372G V2



















































Результаты поиска

Содержание UNO-2372G V2

Отзывы:

Похожие инструкции для UNO-2372G V2

Бренды по названию

Популярные бренды

Advantech UNO-2372G V2, Руководство пользователя

Результаты поиска

Содержание UNO-2372G V2

Отзывы:

Похожие инструкции для UNO-2372G V2

Бренды по названию

Популярные бренды