Advantech UNO-2372G V2 Скачать руководство пользователя страница 2

Страница: 2 / 50

UNO-2372G_V2 User Manual

Copyright

The documentation and the software included with this product are copyrighted 2022

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. The information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of the rights of third parties that may result from its use.

Acknowledgments

Intel

, Celeron™ are the trademarks of Intel

Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.

Support

For more information on this and other Advantech products, please visit our website

at http://www.advantech.com
For technical support services, please visit our support website at http://sup

port.advantech.com/
This manual applies to the following models. These are abbreviated as UNO-2372G

V2 products in this article.
*Model name:
UNO-2372G V2
*Part number:
UNO-2372G-J231AE

UNO-2372G-J231AU

UNO2372GJ2312201-T

UNO2372GJ2312202-T UNO2372GJ2312203-T

UNO2372GJ2312204-T

UNO2372GJ2312205-T UNO2372GJ2312206-T

UNO2372GJ2312207-T

UNO2372GJ2312208-T UNO2372GJ2312209-T

UNO2372GJ2312210-T

UNO2372GJ2312211-T UNO2372GJ2312212-T

UNO2372GJ2312213-T

UNO2372GJ2312214-T UNO2372GJ2312215-T

UNO2372GJ2312301-T

UNO2372GJ2312302-T UNO2372GJ2312303-T

UNO2372GJ2312304-T

UNO2372GJ2312305-T UNO2372GJ2312306-T

UNO2372GJ2312307-T

UNO2372GJ2312308-T UNO2372GJ2312309-T

UNO2372GJ2312310-T

UNO2372GJ2312311-T UNO2372GJ2312312-T

UNO2372GJ2312313-T

UNO2372GJ2312314-T UNO2372GJ2312315-T

UNO2372GJ2312316-T

UNO2372GJ2312317-T UNO2372GJ2312318-T

UNO2372GJ2312319-T

UNO2372GJ2312320-T UNO2372GJ2312401-T

UNO2372GJ2312402-T

UNO2372GJ2312403-T UNO2372GJ2312404-T

UNO2372GJ2312405-T

UNO2372GJ2312406-T UNO2372GJ2312407-T

UNO2372GJ2312408-T

UNO2372GJ2312409-T UNO2372GJ2312410-T

UNO2372GJ2312411-T

UNO2372GJ2312412-T UNO2372GJ2312413-T

UNO2372GJ2312414-T

Part No. 2004237200

Edition 1
November 2022

Содержание UNO-2372G V2



















































Результаты поиска

Содержание UNO-2372G V2

Отзывы:

Похожие инструкции для UNO-2372G V2

Бренды по названию

Популярные бренды

Advantech UNO-2372G V2, Руководство пользователя

Результаты поиска

Содержание UNO-2372G V2

Отзывы:

Похожие инструкции для UNO-2372G V2

Бренды по названию

Популярные бренды