manualshive.com logo in svg

Advantech RSB-4410, Руководство пользователя

Поделиться
Скачать
Advantech RSB-4410 Скачать руководство пользователя страница 32

RSB-4410 User Manual

24

2.

Run tutorial7 for OpenGL ES 1.1

Using Vertex Buffer Objects (VBO) can substantially increase performance by reduc-
ing the bandwidth required to transmit geometry data. Information such vertex, nor-
mal vector, color, and so on is sent once to locate device video memory and then
bound and used as needed, rather than being read from system memory every time.
This example illustrates how to create and use vertex buffer objects.

#./tutorial7

3.

Run tutorial3_es20 for OpenGL ES 2.0

A ball made of a mirroring material and centered at the origin spins about its Y-axis
and reflects the scene surrounding it. 

#./tutorial3_es20

2.5.8

LAN Test 

RSB-4410 sets DHCP as defaul network portocal. 

#ifconfig 

eth0      Link encap:Ethernet  HWaddr 00:04:9F:01:30:E0
          inet addr:172.17.21.96  Bcast:172.17.21.255  

Mask:255.255.254.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  

Metric:1

          RX packets:129 errors:0 dropped:18 overruns:0 

frame:0

          TX packets:2 errors:0 dropped:0 overruns:0 

carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:15016 (14.6 KiB)  TX bytes:656 (656.0 B)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 

frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 

carrier:0

          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

If you would like to config IP manually, please use below command:

Содержание RSB-4410



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды