42
PWS-1409/1419 User’s Manual
Chapter 4
Using The System Controls
4-1 Starting your System
Before starting your system, plug in the power cord and make sure the video and input device
connectors are plugged in. Release the keyboard latches and lay it flat on your work area.
4-1-1 Systems with ATX Power Supply
If you have an ATX power supply, power up your system by pressing the ATX power switch
push button on the front panel of your chassis.
4-2 OSD Controls
The LCD controller includes an integrated RAM-based OSD controller. Through four front
panel controls you can view adjustable features of the LCD through the On-Screen Display.
Follow these steps to activ ate the on-screen display and make any adjustments to suit your
preference:
Step 1. Power up the system.
Step 2. Pres s MENU to invoke the on-screen menu.
Step 3. Press SEL to step through the main options.
Step 4. Press either
+
or
-
button to bring up s ub-menus of the highlighted option.
Step 5. Press SEL to step through the sub-menu options.
Step 6. Press either
+
or
-
to modify the selected parameter
Pressing a button onc e increases or decreases the numerical value by a single digit.
Holding down a button increases the rate of change. Press MENU to return to the previous
screen.
Step 7. After you’ve made your adjustments press MENU repeatedly until the OSD is turned
off.
power switch(1409/1419 power switcch)
ATX switch (1409 only, the ATX power switch is
located in the panel, see it in the next picture )
