15
PWS-1409/1419 User’s Manual
1-8 Detaching the Keyboard
1-8-1 PWS- 1419
1-8-1-a The Standard Keyboard
The subassembly comes with either the STAN-
DARD keyboard, a mechanical switch key-
board with an integrated pointing device, or
with an OPTIONAL membrane keyboard.
Point Device
Touch Pad
The subas sembly comes with a mechanical switch keyboard with an integrated touch pad
device. The signal cable is conceal in the fillister of the keyboard, you have pull it up to con-
nect the connector of the SBC.
The keyboard is detachable. Normally it’s locked to the
chassis by two latch bolts. You can detac h the keyboard
by sliding both release pegs towards each other, com-
pressing the latch bolts until they slide out of the slots.
Pull the keyboard away from the chassis and release
the pegs.
1-8-1-b The Optional Industrial silicon
rubber Keyboard
The concealed cable
touch pad
1-8-2 PWS- 1409
