Advantech PPC-57 Series, Руководство пользователя

Страница: 24 / 108

14 PPC-57 User's Manual
Installing a PS/2 mouse driver
This section is for customers who buy a PPC-57 without the
touchscreen option. If you have purchased a PPC-57 with a
touchscreen, the PS/2 mouse driver is installed when you set up
the touchscreen driver (see Appendix B).
There is an execution file named INSTALL.COM in the root
directory of the system utility software disk. Run INSTALL.COM
to install the system software to your hard disk drive.
Installing the system software automatically creates a directory
named AMS in the root directory of your hard disk drive. Go to
the root directory of AMS, and then type M [Enter] or AMOUSE
to finish the installation.
You can type T [Enter] to test your mouse and PS/2 mouse driver
(for the PPC-57).
Warning! The LCD display is ¼ VGA, so the system utility
software driver is used for ¼ VGA. This is differ-
ent from the general mouse driver.
The touchscreen and PS/2 mouse can be operated simultaneously.
If you install the touchscreen driver, you must also install the PS/2
mouse driver at the same time (see Appendix B for installation
instructions). You do not need to install the PS/2 mouse driver
again.
Installing a serial/COM port mouse driver into the
system
You can use a general mouse driver to install a serial or COM port
mouse driver.
Warning! Before installing the serial port mouse driver, you
must remove the touchscreen driver or PS/2
mouse driver from system memory. Change the
root directory to ATS, and then type M [Enter] or
ATSMOUSE to finish the removal.