Advantech PPC-57 Series, Руководство пользователя

Страница: 99 / 108

Appendix B Touchscreen 89
B.2 Installation
You can find the executable file named INSTALL.COM in the
root directory of the system utility software disk. Run
INSTALL.COM to completely install the system software to your
hard disk drive.
Executing INSTALL.COM
The command prompt is INSTALL<Sd><Td> [Enter].
The symbol <Sd> stands for source disk, which is the disk drive in
which the system sofware disk is inserted. Key in A: or B:.
The symbol <Td> stands for target disk, which is that disk onto
which you wish to install the system sofware. Key in C: or D:.
Installing the system software automatically creates a directory
named ATS in the root directory of your hard disk drive.
Installing the touchscreen driver
1. Go to the root directory of ATS.
2. Type M [Enter] (or ATSMOUSE).
Calibrating the touchscreen
1. Run the Setup program (see Section B3).
2. Select the VGA modes which your program requires.
3. Run the calibration function for each VGA mode which has
been selected. You can test them after calibration, and then exit
to save the settings.