Advantech POC-S176 Series, Руководство пользователя

Страница: 4 / 58

POC-S176 User Manual iv
Make sure the voltage of the power source is correct before connecting the equip-
ment to the power outlet. Position the power cord so that people cannot step on it. Do
not place anything over the power cord. If the equipment is not used for a long time,
disconnect it from the power source to avoid damage by transient over voltage.
If your computer clock is unable to keep accurate time or the BIOS configuration
resets to default, please check the battery.
Improper installation of VESA mounting can result in serious personal injury! VESA
mount installation should be completed by a professional technician, please contact
the service technician or your retailer if you need this service. The detailed installa-
tion procedure is specified in Appendix A.
CLASSIFICATION:
! Supply Class I adapter
! No applied parts
! IPX1
! Continuous operation
! Not AP or APG category
Maintenance: To properly maintain and clean the surfaces, use only the approved
products or clean with a dry applicator.
Make sure users do not come in contact with SIP/SOPs and the patient at the same
time.
Caution! Do not leave this equipment in an uncontrolled environment where the
storage temperature is below -20°C (-4°F) or above 60°C (140°F). This
may damage the equipment.
Caution! Do not replace the battery yourself. Please contact a qualified technician
or your retailer.
The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.
Warning! This device is not suitable for use in the presence of flammable anes-
thetic mixtures with air, oxygen, nitrous oxide, or as a life support sys-
tem.
Caution! When servicing the device, always use replacement parts that meet
Advantech standards. Advantech Medical cannot warrant or endorse
the safe performance of third-party replacement parts for use with our
medical device.