Advantech PCI Series Скачать руководство пользователя страница 44

Страница: 44 / 62

PCI Communication

User Manual

4.5.1

Status Bar Messages

BUSY

: The port is currently used by another application.

FAIL

: The configuration parameters are not accepted by the port.

N/A PORT

: The port is not available in the system.

READY

: The port is ready to run or to be configured.

RUNNING

: The test is running on the port.

STOPPED

: The test running on the port has been manually stopped.

4.5.2

Message Logo Messages

Port Opened

: The port has been manually opened.

Port Setup Fail

: The port configuration parameters are incorrect or unsupported.

Port Running

: The port is running a test.

Port Stopped

: The test has stopped on the port.

Tx Starting/Tx Stopped

: Transmission has started/stopped.

Rx Starting/Rx Stopped

: Reception has started/stopped.

Break Error

: A break event has been detected on the port.

Framing Error

: A timing error (i.e., from the start bit to the stop bit) has been

detected on the port.

Port I/O Error

: An incorrect I/O event has been detected on the port.

Rx Overrun

: Received data have been overwritten before being processed.

Rx Buffer Full Error

: The buffer on the receiving end is full, meaning that newly

arrived data will be ignored.

Tx Buffer Full Error

: The buffer on the transmitting end is full, meaning that data

transmitted by applications will be ignored.

LB Error - %d

: Data error detected in loopback.

LB Rx Pending

: Loopback mode is waiting for incoming data.

Data Setup Error

: Parameter errors in the port configuration.



Содержание PCI Series































































Результаты поиска

Содержание PCI Series

Отзывы:

Похожие инструкции для PCI Series

Бренды по названию

Популярные бренды

Advantech PCI Series, Руководство пользователя

Результаты поиска

Содержание PCI Series

Отзывы:

Похожие инструкции для PCI Series

Бренды по названию

Популярные бренды