Advantech PCI-1711 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 60

background image

Copyright

This documentation and the software included with this product are
copyrighted 1999 by Advantech Co., Ltd. All rights are reserved.
Advantech Co., Ltd. reserves the right to make improvements in the
products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advantech
Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties which may result from its use.

Acknowledgments

PC-LabCard is a trademark of Advantech Co., Ltd. IBM and PC are
trademarks of International Business Machines Corporation. MS-
DOS, Windows, Microsoft Visual C++ and Visual BASIC are trade-
marks of Microsoft Corporation. Intel and Pentium are trademarks of
Intel Corporation. Delphi and C++Builder are trademarks of Inprise
Corporation.

CE notification

The PCI-1711/1731, developed by ADVANTECH CO., LTD., has
passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from Advantech.

Please contact your local supplier for ordering information.

On-line Technical Support

For technical support and service, please visit our support website at:

http://support.advantech.com

Part No. 2003171100 1st Edition

Printed in Taiwan October 1999

1
2
3
...
»

Содержание PCI-1711





























































Отзывы:

Нет отзывов

Похожие инструкции для PCI-1711

Бренд: S-1 Страницы: 4

RADEON 8500 MAC EDITION

Бренд: ATI Technologies Страницы: 45

Бренд: P+E Technik Страницы: 10

FASTETHERNET 6U

Бренд: Sun Microsystems Страницы: 106

Gemplus 41N3005

Бренд: Lenovo Страницы: 42

Бренд: Sebury Страницы: 14

Бренд: ADLINK Technology Страницы: 127

Бренд: Tecknet Страницы: 4

Aria extreme 54 Mbps Wireless LAN

Бренд: Sonnet Страницы: 86

Бренд: Y-E Data Страницы: 27

Бренд: Digitus Страницы: 6

Бренд: Digitus Страницы: 2

Бренд: Digitus Страницы: 6

Бренд: Digigram Страницы: 24

Бренд: Digigram Страницы: 28

Бренд: Digigram Страницы: 29

Бренд: Digigram Страницы: 33

Бренд: Takstar Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды