manualshive.com logo in svg

Advantech PCE-7214, Руководство пользователя

Поделиться
Скачать
Advantech PCE-7214 Скачать руководство пользователя страница 44

PCE-7214 User Manual

34

PCI latency timer

Use this to adjust the PCI Latency Timer. This option sets the latency of all PCI
devices on the PCI bus. The Optimal and Fail-Safe default setting is 64.
Allocate IRQ to PCI VGA 
Set this value to allow or stop the system from giving the VGA adapter card an inter-
rupt address. The Optimal and Fail-Safe default setting is Yes.

Palette snooping

Set this value to allow the system to modify the Palette Snooping settings. The Opti-
mal and Fail-Safe default setting is Disabled.

PCI IDE BusMaster

Set this value to allow or prevent the use of PCI IDE Busmastering. The Optimal and
Fail-Safe default setting is Disabled.

Off board PCI/ISA IDE card

Set this value to allow an add-on PCI/ISA IDE card to be selected. The Optimal and
Fail-Safe default setting is Auto.

IRQ

IRQ[3,4,5,7,9,10,11,14,15]:

–

Available: Specified IRQ is available to be used by PCI/PnP devices.

–

Reserved: Specified IRQ is reserved for use by Legacy ISA devices.

DMA Channel [0,1,3,5,6,7]: 

–

Available: Specified DMA is available to be used by PCI/PnP devices.

–

Reserved: Specified DMA is reserved for use by legacy ISA devices.

–

Reserved Memory Size: Size of memory block to reserve for legacy ISA 

devices.

Содержание PCE-7214



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды