Advantech PCA-6275 Скачать руководство пользователя страница 46

Страница: 46 / 84

PCA-6275 User's Manual

3.4.5 Boot Up NumLock Status

The default is “On”.

Keypad boots up to number keys.

Off

Keypad boots up to arrow keys.

3.4.6 Gate A20 Option

Normal

The A20 signal is controlled by the keyboard
controller or chipset hardware.

Fast (Default)

The A20 signal is controlled by Port 92 or the
chipset specific method.

3.4.7 Typematic Rate Setting

The typematic rate determines the characters per second accepted by
the computer. The Typematic Rate setting enables or disables the
typematic rate.

3.4.8 Typematic Rate (Chars/Sec)

BIOS accepts the following input values (characters/second) for
typematic rate: 6, 8, 10, 12, 15, 20, 24, 30.

3.4.9 Typematic Delay (msec)

Typematic delay is the time interval between the appearance of the
first and second characters, when holding down a key. The input
values for this category are: 250, 500, 750, 1000 (msec).

3.4.10 Security Option

This setting determines whether the system will boot up if the
password is denied. Access to Setup is, however, always limited.

System

The system will not boot, and access to Setup will be

denied if the correct password is not entered at the prompt.

Setup

The system will boot, but access to Setup will be denied if

the correct password is not entered at the prompt.

Содержание PCA-6275





















































































Результаты поиска

Содержание PCA-6275

Отзывы:

Похожие инструкции для PCA-6275

Бренды по названию

Популярные бренды

Advantech PCA-6275, Руководство пользователя

Результаты поиска

Содержание PCA-6275

Отзывы:

Похожие инструкции для PCA-6275

Бренды по названию

Популярные бренды