Advantech MIC-6311, Руководство пользователя, Страница: 68 / 118

MIC-6311 User Manual 56
Get the list of all supported users.
[root@localhost ~]# ipmitool user list
ID Name Callin Link Auth IPMI Msg ChannelPriv Limit
1 true true true NO ACCESS
2 callback true true true NO ACCESS
3 user true true true NO ACCESS
4 operator true true true NO ACCESS
 user set name <user id> [username]
This command can be used to change the user name.
[root@localhost ~]# ipmitool user set name 2 newuser
 user set password <user id> [password]
This command can be is used change the user password.
[root@localhost ~]# ipmitool user set password 2 newpass-
word
3.11.2.3 SOL session with IPMItool
Advantech recommends using IPMItool to successful open a SOL session with MIC-
6311. The “lanplus” interface (RMCP+) of IPMItool must be used to be able to
change SOL parameters and establish SOL sessions.
Following general IPMItool parameters are needed for RMCP+ and IPMItool “sol”
commands:
ipmitool -I lanplus -H <IP-Address> -U <User> -P <Password>
sol <SOL-Command>
Command Line Syntax:
I lanplus
Specifies RMCP+ as desired protocol
H <IP-Address> IP address assigned to the BMC
U <User> User account, default “administrator”
P <Password> Password used with specified user account (default password
for user “administrator” is “advantech”)
3.11.2.4 SOL Parameter Commands
 sol info [channel number]
Read out the SOL configuration parameters for a given channel.
# ipmitool -I lanplus <IP-Address> -U <User> -P <Password>
sol info
Set in progress : set-complete
Enabled : false
Force Encryption : true
Force Authentication : true
Privilege Level : ADMINISTRATOR
Character Accumulate Level (ms) : 250
Character Send Threshold : 32
Retry Count : 2
Retry Interval (ms) : 1000
Volatile Bit Rate (kbps) : 115.2