manualshive.com logo in svg

Advantech MIC-6311, Руководство пользователя, Страница: 37 / 118

Поделиться
Скачать
Advantech MIC-6311 Скачать руководство пользователя страница 37

25

MIC-6311 User Manual

Chapter 2

A

MI BIOS

Setup

2.3.2.5

USB Configuration

Figure 2.8 USB configuration

Legacy USB Support

Enables support for legacy USB. The auto option disables legacy support if no
USB devices are connected.

USB3.0 Support

Enables support for USB 3.0.

XHCI /EHCI Hand-off

This item is a workaround for an OS without XHCI / EHCI hand-off support.

Mass Storage Devices

Shows details of USB mass storage devices.
USB hardware delays and time-outs:

USB Transfer Time-outs

Sets the USB transfer time-out value for control, bulk, and interrupt transfers.

Device Reset Time-outs

Sets the time-out periods for USB device initialization and the Start Unit com-
mand to enable mass storage access operations.

Device Power-up Delay

Set the time allocated for devices to report themselves to the host controller
through USB hubs. When set to Auto, root port devices are allocated 100 milli-
seconds, and devices connected to hubs are allocated the time specified in the
hub descriptor. When this parameter is set to Manual, a delay of 1 to 40 sec-
onds can be selected.

Device Power-up Delay in Seconds

The “device power-up delay in seconds” field must be enabled to set a delay of
1 to 5 seconds.

Содержание MIC-6311























































































































Отзывы:

Нет отзывов