Advantech MIC-3758DIO, Руководство пользователя

Страница: 15 / 52

9 Chapter 2
2.2 Hardware Installation
When installing the MIC-3758DIO card, Please make sure the DLL
driver of MIC-3758DIO installation is completed. You can then go on to
install the MIC-3758DIO card in your CompactPCI system. If you have
any doubts, please consult the user manual or related documentation.
Please follow the below steps to install the card in your system.
2.2.1 Installing a CompactPCI Card:
Step 1: Remove one cover on the unused slot of your CompactPCI com-
puter slot.
Step 2: Hold the card vertically. Be sure that the card is pointing in the
correct direction. The components of the card should be pointing to the
right-hand side and the black handle of the card should be pointing to the
lower edge of the backplane.
Step 3: Hold the lower handle and pull the handle down to unlock it.
Step 4: Insert the MIC-3758DIO card into the CompactPCI chassis care-
fully by sliding the lower edges of the card into the card guides.
Note: Keep the antistatic bag for future use. You
might need the original bag to store the card if
you have to remove the card from PC or trans-
port it elsewhere.
Note: Make sure you first install the driver before
installing the card. We strongly recommend
that you install the software driver before
installing the hardware into your system, since
this will guarantee a smooth and trouble-free
installation process. For more information
about the driver installation, configuration and
removal procedures for Windows 9X, Windows
NT, Windows 2000 and Windows XP, please
see the Device Driver Manual.