Advantech LNC M5800 Series, Руководство по эксплуатации

Страница: 127 / 197

Milling Machine Series
CNC operations
122
Advantech-LNC Technology Co., Ltd.
to the tool after completing automatic tool alignment.
Set the gap value for workpiece A:
i. Move the cursor to the "Work coordinate system" field, enter the value 55 in the input area and press the
<Input> key.
ii. Switch to hand wheel mode (MPG), move the tool to the position above workpiece A such that the tool
tip is just touching the surface of workpiece, and then press the 【 Z gap 】 key to set the gap value into the
G55 coordinate system.
Set the gap value for workpiece B:
i. Move the cursor to the "Work coordinate system" field, enter the value 54 in the input area and press the
<Input> key.
ii. Move the cursor to the next field (extended coordinate system), enter the value 100 in the input area and
press the <Input> key.
iii. Switch to hand wheel mode (MPG), move the tool to the position above workpiece B such that the tool
tip is just touching the surface of workpiece, and then press the 【 Z gap 】 key to set the gap value into the
G54P100 coordinate system.
1.8.5.2 Glass edge milling machine, applicable industries
The tool length of automatic tool alignment should be saved into the Z axis coordinate of the designated work coordinate
system. The operation is described below:

Setting up the "set coordinate system": Move the cursor to the "Set coordinate system" field, enter a numerical
value (from 54 to 59) in the input area and press the <Input> key. If the extended coordinate system G54 is
required, a numerical value (from 101 to 200) should be entered in the input area before pressing the <Input>
key.