Advantech LNC M5800 Series, Руководство по эксплуатации

Страница: 195 / 197

Milling Machine Series
Control panel operations
190
Advantech-LNC Technology Co., Ltd.
2.8 Program start (CYCLE START) & program pause (FEED HOLD)
Button type Key style
Program start (CYCLE START)
After program input, the operation mode should be switched to memory mode (MEM) or manual data input mode (MDI)
before pressing the program start key to execute the program. The indicator light will be turned on while the program is
executing. There are several uses for the program start (CYCLE START) key as shown below:
a. Automatic execution under memory mode (MEM)
When a program is selected, the program start key can be pressed in memory mode to execute the program. During
program execution, the program indicator light will remain on until program execution has ended. All three axis must
return to their reference point before program execution starts. If not, the reference point requirement on the user
function settings screen can be switched to Off for the program to be executed without returning to the reference
point.
b. Automatic execution under manual data input mode (MDI)
Under manual data input mode, users can enter single block program commands such as G91 G01 X100. Z100.,
followed by pressing the program start (CYCLE START) key to execute the block command. The objective of this
execution mode is different from memory mode; it is usually used for testing certain functions. During execution, the
indicator will remain turned on until execution has ended.
Program pause (FEED HOLD)
Press this key to pause program execution. During the pause period, the FEED HOLD indicator will be turned on.
Miscellaneous function (M), spindle function (S), and tool function (T) will maintain their current status. Press the
program start key again to resume program execution.