Advantech iDAQ-934 Скачать руководство пользователя страница 16

Страница: 16 / 54

iDAQ-934_964 User Manual

1.5

Software Utilities

Advantech offers device drivers, SDKs, third-party driver support and application

software to help fully exploit the functions of your iDAQ system. All these software

packages are available on Advantech website: http://www.advantech.com/.
The Advantech Navigator is a utility that allows you to set up, configure and test your

device, and later stores your settings in a proprietary database.

To set up the I/O device for your card, you could first run the Advantech Naviga

tor program (by accessing Start/Programs/Advantech Automation/DAQNavi/

Advantech Navigator). The settings could also be saved.

You can then view the device(s) already installed on your system (if any) on the

Installed Device tree view. If the software and hardware installation are com

pleted, you will see iDAQ modules in the Installed Devices list.

1.6

Software Development Using DAQNavi SDK

DAQNavi SDK is the software development kit for programming applications with

Advantech DAQ products. The necessary runtime DLL, header files, software man

ual and tutorial videos can be installed via XNavi installer. They can be found under

C:\Advantech\DAQNavi (default directory) after the finishing the installation.

1.7

Application Software DAQNavi MCM

DAQNavi MCM is an application software focusing on high-speed data acquisition,

data monitoring and network access. It provides a graphical interface for users to

achieve DAQ configuration, data pre-processing, feature extraction, user-defined for

mula calculation and the output settings to upload data. All settings can also be

saved to a project file for further parameter management. On top of that, the datalog

ging function is also available in DAQNavi/MCM. All data can be saved not only on

local storage, but also in remote storage.
By introducing the DAQNavi/MCM, the DAQ system could become an IoT-solution-

ready edge device. For more information, please search for DAQNavi/MCM on the

Advantech Support Portal (https://www.advantech.com/support).

1.8

FPGA Code Download

The FPGA can also be updated via the interface in Navigator. However, it isn’t the

normal situation to move onto the FPGA update. Advantech strongly suggests you to

consult your technical support before starting an FPGA update.

1.9

Accessories

PCL-1010B-1E

BNC Coax Cable, 1m

PSD-A40W12

DIN Rail AC to DC 100-240V 40W 12V

PSD-A40W24

DIN Rail AC to DC 100-240V 40W 24V

Содержание iDAQ-934























































Результаты поиска

Содержание iDAQ-934

Отзывы:

Похожие инструкции для iDAQ-934

Бренды по названию

Популярные бренды

Advantech iDAQ-934, Руководство пользователя

Результаты поиска

Содержание iDAQ-934

Отзывы:

Похожие инструкции для iDAQ-934

Бренды по названию

Популярные бренды