Advantech iDAQ-900 Series Скачать руководство пользователя страница 14

Страница: 14 / 56

iDAQ-900 User Manual

1.3

Product Features

1.3.1

Power Input

The iDAQ chassis requires an external power supply to operate. Connect the exter

nal power supply to the 2-pin spring terminal, and insert the terminal to the power

input connector. Refer to 2.4.2 for the pin assignment of the terminal and A.7 for the

required supply voltage and power rating.

1.3.2

Upstream USB Port

Use the lockable USB 3.0 cable in the package to connect the USB type-B connector

on the iDAQ chassis to a SuperSpeed USB 3.0 port on the host computer, and lock

the cable to the iDAQ chassis with a screw. A Hi-Speed USB 2.0 port on the host

computer can also be used, but not recommended. Acquisition speed may be limited

when using a Hi-Speed USB 2.0 port. The iDAQ chassis only draws minimum current

from the upstream port. External power supply is required for operation. Refer to A.7

for detailed specifications.

1.3.3

Downstream USB Port

There is an USB 3.0 hub controller inside the iDAQ chassis, which provides another

general purpose SuperSpeed USB 3.0 port for downstream extension. Any USB

device can be connected to this port, such as another iDAQ chassis. This type-A con

nector also provides a screw hole for use on the lockable USB cable.

1.3.4

LED Indicators

The LED indicators shows the operational status of the iDAQ chassis. Refer to 3.7

Status Indication for detailed description.

1.3.5

Programmable Function Pin (PFP)

The programmable function pins provide bi-directional, multi-function signals. Exter

nal trigger or clock signals can be fed into PFP pins for acquisition timing control. The

internal trigger or clock signals can also be routed and output to PFP pins for external

use, such as synchronizing multiple iDAQ chassis. Refer to section A6 for detailed

specifications and section 3.6 for pin definition.

1.3.6

Slots for IDAQ Modules

Each slot of iDAQ systems accepts one iDAQ module. Insert the module and screw it

to the chassis firmly using the two screws. Make sure both screws are on their

threads before tightening.

Number

Component

Board ID rotary switch

LED indicators

Holes for panel mount

Chassis grounding screw

Power input connector

Upstream USB port connector

Programmable function pin (PFP) BNC connectors

Slots for iDAQ modules

Содержание iDAQ-900 Series

























































Результаты поиска

Содержание iDAQ-900 Series

Отзывы:

Похожие инструкции для iDAQ-900 Series

Бренды по названию

Популярные бренды

Advantech iDAQ-900 Series, Руководство пользователя

Результаты поиска

Содержание iDAQ-900 Series

Отзывы:

Похожие инструкции для iDAQ-900 Series

Бренды по названию

Популярные бренды