ICR-4461
All metal parts, including the box, are connected together with the negative pole of the
power supply (common pole). If recommended for the installation environment, protect the
router by grounding it properly by the grounding screw, see Figure
Figure 17: Position of the Grounding Screw
2.7
Low Power Mode
In applications requiring low power consumption (such as solar power - not 7/24 mode)
is strictly recommended to use LPM mode prior to powering down the entire router.
LPM (Low Power Mode) is a router mode where the router is in sleep mode with minimal
power consumption; see Chapter
for the LPM consumption. The router can be woken up
from this mode by a signal applied to the BIN1 input or after a predetermined period of time.
Putting the router into LPM mode can be done using the
lpm
command, see
application note for more details.
21
