Advantech ICR-1601, Руководство по настройке

Страница: 66 / 273

ICR-1601
66
When WPA or WPA2 is selected
They are implementation of IEEE 802.11i. WPA only had implemented part of
IEEE 802.11i, but owns the better compatibility.
WPA2 had fully implemented 802.11i standard, and owns the highest
security.

RADIUS Server
The client stations will be authenticated by RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key
When WPA / WPA2 is selected
It owns the same setting as WPA or WPA2. The client stations can associate
with this device via WPA or WPA2.
When WPA-PSK or WPA2-PSK is selected
It owns the same encryption system as WPA or WPA2. The authentication
uses pre-shared key instead of RADIUS server.
When WPA-PSK / WPA2-PSK is selected
It owns the same setting as WPA-PSK or WPA2-PSK. The client stations can
associate with this device via WPA-PSK or WPA2-PSK.
Encryption
1. A Must filled setting.
2. VAP1: AES is
selected be default;
Others: None is
selected be default.
Select a suitable encryption method and enter the required key(s).
The available method in the dropdown list depends on the Authentication
you selected.
None
It means that the device is open system without encrypting.
WEP
Up to 4 WEP keys can be set, and you have to select one as current key. The
key type can set to HEX or ASCII.
If HEX is selected, the key should consist of (0 to 9) and (A to F).
If ASCII is selected, the key should consist of ASCII table.
TKIP
TKIP was proposed instead of WEP without upgrading hardware. Enter a Pre-
shared Key for it. The length of key is from 8 to 63 characters.
AES
The newest encryption system in WiFi, it also designed for the fast 802.11n
high bitrates schemes. Enter a Pre-shared Key for it. The length of key is from
8 to 63 characters.
You are recommended to use AES encryption instead of any others for
security.
TKIP / AES
TKIP / AES mixed mode. It means that the client stations can associate with
this device via TKIP or AES. Enter a Pre-shared Key for it. The length of key is
from 8 to 63 characters.
STA Isolation
VAP1: The box is
checked by default;
Others: unchecked by
default. Check the Enable box to activate this function.
By default, the box is checked; it means that stations which associated to the
same VAP cannot communicate with each other.
Broadcast SSID
VAP1: The box is
checked by default;
Others: unchecked by
default. Check the Enable box to activate this function.
If the broadcast SSID option is enabled, it means the SSID will be
broadcasted, and the stations can associate with this device by scanning
SSID.
Enable
VAP1: The box is
checked by default;
Others: unchecked by
default. Check the Enable box to activate this VAP.