Advantech ICR-1601, Руководство по настройке

Страница: 63 / 273

ICR-1601
63
Configure WiFi Setting
Configuring Wi-Fi Settings
Item Value setting Description
WiFi Module
The box is checked by
default Check the Enable box to activate Wi-Fi function.
Channel
1. A Must filled setting.
2. Auto is selected be
default.
Select a radio channel for the VAP. Each channel is corresponding to
different radio band. The permissible channels depend on the Regulatory
Domain.
There are two available options when Auto is selected:

By AP Numbers
The channel will be selected according to AP numbers (The less, the
better).

By Less Interference
The channel will be selected according to interference. (The lower, the
better).
WiFi System A Must filled setting
Specify the preferred WiFi System. The dropdown list of WiFi system is
based on IEEE 802.11 standard.

2.4G WiFi can select b, g and n only or mixed with each other.
WiFi Operation
Mode
Specify the WiFi Operation Mode according to your application.
Go to the following table for AP Router Mode, WDS Only Mode, and WDS
Hybrid Mode settings.
Note: The available operation modes depend on the product specification.
In the following, the specific configuration description for each WiFi operation mode is given.
AP Router Mode & VAPs Configuration
For the AP Router mode, the device not only supports stations connection but also the router
function. The WAN port and the NAT function are enabled.