Advantech FWA-2112, Руководство пользователя

Страница: 33 / 40

23 FWA-2112 User Manual
C
ha
pte
r 1
Lin
ux
P
latf
orm
S
oft
w
are
G
uid
e I
ntr
od
uc
tio
n
1.8.2 Command and Usage
Detailed commands and usages please refer to Advance LAN Bypass Control Utility
user manual. Please contact Advantech FAE to get it.
The following is usage:
#sudo ./lbpcu
Usage: LBPCU {op}
{op}: The operation you want to do.
-V: Get liblbpcu version.
-VP: Get protocol version between NIC and FW.
-VF: Get FW version.
-VB: Get FW bootloader version.
-n: Get number of segment that define in config file
-GA: Get current action for specific event on this segment
-SA: Set current action for Event on this segment.
-SW: Set WDT initial countdown value, 100ms/count.
-GW: Get WDT status.
-RW: Reset Watchdog counter to the preset value and start the countdown.
-RAW: Reset Watchdog counter to the preset value and start the countdown for all
segments.
-StopW: Stop the WDT.
-StopAW:Stop the WDT for all segments.
-ST: Set toggle pin mode.
-SEW: Set External watchdog mode.
-SWT: Start wdt by toggle.
-SAWT: Start wdt by toggle for all segments.
-WT: Toggle the NIC to strobe/reset the WDT. Toggle pin WDT mode needs to be
enabled & armed.
-WAT: Toggle the NIC to strobe/reset the WDT for all segments. Toggle pin WDT
mode needs to be enabled & armed.
-GLEA: Get last event and last action on this segment.
-SCA: Set the action on this segment. This command will change the action imme
-
diately and won't change the event-action relationship.
-SACA: Set the action on all segments. This command will change the action imme
-
diately and won't change the event-action relationship.
-SRM: Start reset monitoring by LBPCU.
-GRMS: Get reset monitoring status.
-SRMT: Set reset monitoring timer value.
-GRMT: Get reset monitoring timer value.
-ML: Set message output level
-SBCT: Set bypass control type
-GBCT: Get bypass control type
-SBL: Set duty and period for LED indication of action bypass.
-GBL: Get duty and period for LED indication of action bypass.
-SDL: Set duty and period for LED indication of action disconnect.
-GDL: Get duty and period for LED indication of action disconnect.
-SMSM: Set the master slave mode for each segments.