FWA-1211 Startup Manual 5
Installing the DIN Rail
1. Take the screw and bracket out from the accessory box.
2. Install the screw and bracket as shown below.
3. Install the machine on the bracket accordingly.
Installation (Cont.)
Jumpers and Connectors
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Jumper/Connector List
Connector Name
Function
SODIMM1
System memory expansion slot
for DDR3L SO-DIMM.
BAT1
Battery holder for coin battery
SATA1
SATA IO connector
SATA_PWR1
Power connector for SATA HDD
used
MSATA1
Half size mSATA connecter
8051_JTAG1
Programming 8051 pin header
LPC1
LPC bus connecter for TPM
module
LAN1, LAN2, LAN_
MAGT1
RJ45 LAN connectors
USB2_1
USB2.0 connectors
USB2_2
USB2.0 connectors
COM1
RJ45 console connector
HDMI-D1
Micro HDMI connector
SYS_RST1
System reset button
PWR_BTN1
Power button pin header
CN3
Power in pin header
Ex1
Extend board connecter
JCMOS1
Clear CMOS jumper
PSON1
AT/ATX mode select
Jumper Name Pin
Default Setting Function
JCMOS1
1-2
Jumper short
Normal status
2-3
open
Clear CMOS
PSON1
1-2
Jumper short
AT mode
2-3
open
ATX mode
