background image

FWA-1211 Startup Manual  1

Before installation, ensure that the following materials have 

been received:

• 

One FWA-1211 din-rail Platform

• 

One box of accessories

•  One warranty certificate

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately. 

Note 1:

     Acrobat Reader is required to view any PDF file 

Acrobat Reader can be downloaded at: www.

adobe.com/Products/acrobat/readstep2.html 

(Acrobat is a trademark of Adobe).

Note 2:

     Supplied by certified power supply:

 

FSP040-RHAN2 

ADP-40GD BH

Industrial Grade Cyber Security Appliance based on 

Intel® Atom™ x5-E3940/ x5-E3930 Processor Platform

Startup Manual

 

Main Board Functions

• 

CPU:

 Intel Atom™ E3940/E3930

• 

BIOS:

 AMI™   

• 

Memory:

 1 x DDR3L 1333/1600/1867 MHz SODIMM, up 

to 8 GB 

• 

Ethernet:  

5 x 10/100/1000 Mbps RJ45 via Intel i210-IT with 2 

segment bypass  

- 2 x10/100/1000 Mbps SFP via Intel i210-IS

• 

Storage: 

1 x 2.5” internal SSD; 1 x mSATA slot (half size)

• 

Peripherals: 

USB:12x USB2.0 on front panel 

- 2 x Power LED 

- 1 x HDD LED 

- 1 x Alarm LED 

- 1 x Micro-HDMI 

- 1 x Reset 

- 1 x Console 

- 2 x DB9 RS-232/422/485 seriel port (SKU option)

• 

Dimensions (W x L x H):

 88 mm x 127 mm x 150 mm

• 

Weight: 

3 Kg

• 

Environment:

  Operating                Non-operating

• 

Temperature:

  -40 °C ~ 70 °C         -40 °C ~ 85 °C  

                        (-40 °F ~ 158 °F)      (-40 °F ~ 185 °F)

• 

Altitude

: Below 5000 m

• 

Humidity: 

5% ~ 95% 

• 

IP Rating:

 IP40

  Specifications

  Packing List

For more information on this and other Advantech 

products, please visit our website at:

http://www.advantech.com.tw/support
http://www.advantech.com

For technical support and service, please visit our 

support website at:

http://www.advantech.com/support

This manual is for the FWA-1211 series Rev. A.
Part No. 2002121100                          1 st Edition
                                                             December 2020

Warning:

Please power off the machine and disconnect it from 

all power source before you disassemble FWA-1211 

machine.

This product is intended to be supplied by an UL Listed 

power supply or dc source suitable for use at minimum 

Tma 40 degree C whose output meets ES1, LPS, and 

is rated 9-36Vdc, 4-1A. If need further assistance, 

please contact Advantech for further information.

Содержание FWA-1211
















Отзывы: