Advantech EKI-7712G-4FMPI, Руководство пользователя

Страница: 86 / 169

EKI-7712G-4FMPI User Manual 72
To access this page, click L2 Switching > Loopback Detection > Global Settings .
Figure 4.66 L2 Switching > Loopback Detection > Global Settings
The following table describes the items in the previous figure.
The ensuing table for Loopback Detection Global Information settings are infor -
mational only: State, Interval and Recover Time.
4.5.13.2 Port Settings
The Port Settings page allows you to select ports that are detected by the loopback
detection function and configure their status (enabled or disabled).
To access this page, click
L2 Switching > Loopback Detection > Port Settings .
Figure 4.67 L2 Switching > Loopback Detection > Port Settings
The following table describes the items in the previous figure.
The ensuing table for
Loopback Detection Port Information
settings are informa -
tional only: Port, Enable State and Loop Status.
Item Description
State Select Enabled or Disabled to setup the loopback mode.
Interval Enter the variable in seconds (1 to 32767) to set the interval at which
frames are transmitted.
Recover Time Enter the variable in seconds (60 to 1000000) to define the delay
before recovery.
Apply Click Apply to save the values and update the screen.
Item Description
Port Select Enter the port to define the local loopback detection setting.
Enabled Select
Enabled
or
Disabled
to setup the Loopback Detection
function.
Apply Click Apply to save the values and update the screen.