Advantech EKI-7712G-4FMPI, Руководство пользователя

Страница: 125 / 169

111 EKI-7712G-4FMPI User Manual
4.9.2.5 SNMP Trap
The SNMP Trap page allows you to set the IP address of the node and the SNMP
credentials corresponding to the version that is included in the trap message.
To access this page, click
Management > SNMP > SNMP Trap .
Figure 4.142 Management > SNMP > SNMP Trap
The following table describes the items in the previous figure.
The ensuing table for Trap Host Status settings are informational only: No., IP
Address, Community Name, Version and Delete (click to delete the desired IP
address).
4.9.3 Power Over Ethernet
Power Over Ethernet is the function supplying power to Powered Devices (PD)
through the switch in the event that AC power is not readily available.
Power over Ethernet can be used for the following areas:

Surveillance devices

I/O sensors for security requirements

Wireless access points
Item Description
IP Address Enter the IP address to designate the SNMP trap host.
Community Name/
User Name
Click the drop-down menu to select a defined community name.
Version Click the drop-down menu to designate the SNMP version credentials
(v1, v2c - trap, v2c - inform, v2c - trap or v2c - inform).
Add Click Add to save the values and update the screen.
Note! EKI-7712G-4FMPI, ports 1 ~ 6 are compliant with IEEE 802.3at/af which
provide up to 30 watts per port. Port 7 and Port 8 are compliant with
IEEE 802.3bt which provide up to 90 watts per port.