Advantech EKI-7659CPI, Руководство пользователя

Страница: 56 / 101

EKI-7659CPI_Manual_ed33 46
Configure the system event mode and system log server IP which you want to collect.
•
Syslog Client Mode: select the system log mode – client only, server only, or both S/C.
•
System Log Server IP Address: assign the system log server IP.
•
Click
Reload
to refresh the events log.
•
Click
Clear
to clear all current events log.
•
After configuring, Click
Apply
.
Figure 3.16: Syslog Configuration
System Event Log - SMTP Configuration
You can set up the mail server IP, mail account, account password, and forwarded email account for
receiving the event alert.
•
Email Alert: enable or disable the email alert function.
•
SMTP Server IP: set up the mail server IP address (when Email Alert enabled, this function will then
be available).
•
Sender: key in a complete email address, e.g. switch101@123.com , to identify where the event log
comes from.
•
Authentication: mark the check box to enable and configure the email account and password for
authentication (when Email Alert enabled, this function will then be available).
•
Mail Account: set up the email account, e.g. johnadmin@123.com, to receive the alert. It must be an
existing email account on the mail server, which you had set up in SMTP Server IP Address column.
•
Password: The email account password.
•
Confirm Password: reconfirm the password.
•
Rcpt e-mail Address 1 ~ 6: you can assign up to 6 e-mail accounts also to receive the alert.