Advantech EKI-6333AC-M12 Series, Руководство пользователя

Страница: 21 / 38

EKI-6333AC-M12 Series User Manual 13
To wire the power inputs:
Make sure the power cable is not connected to the switch or the power converter
before proceeding.
1. Align the notch on the cable with the protrusion on the connector port. Before
inserting the cable, the cable must be aligned to the connector to prevent
damage to the pins in the port.
2. Insert the cable and gently push it in. If there is any resistance, remove the
cable and re-align it with the connector.
3. Once the cable is fully seated in the port, turn the nut on the cable to secure it to
the connector.
Figure 2.13 Installing the Power Cable
The power input is now connected to the switch. The switch can be powered on.
To remove the power inputs:
Make sure the power is not connected to the device or the power converter before
proceeding.
1. Loosen the screws securing the connector to the power cable receptor.
2. Remove the power cable from the device.
Figure 2.14 Removing the Power Cable
2
1
1
2