Advantech EKI-5624PI, Руководство пользователя

Страница: 50 / 64

EKI-5729PI & EKI-5624PI User Manual 41
5. Click Apply to configure the function.
Figure 4.10 Setting Modbus/TCP Idle Time
The Modbus/TCP idle time is now set.
Setting LLDP
1. Select the device to configure by clicking on it.
2. In the Configuration Area, select the System tab.
3. Under LLDP, check Enable LLDP Feature to enable the LLDP feature. This
feature is used by the device to advertise its identity, capabilities, and neighbors
throughout the network.
4. Enter a variable representing the idle time for sending of LLDP information.
Setting Networks Parameters
For setting networks parameters, see “Configuring Network Settings” on page 32.
Setting SNMP
1. Select the device to configure by clicking on it.
2. In the Configuration Area, select SNMP tab.
The Basic and Community settings are listed for configuration.
3. In the SNMP Basic Settings selection, enter a contact and location in the
respective fields.
4. In the SNMP Community Settings selection, the read-only and read-write strings
are required.