Advantech EKI-5624PI, Руководство пользователя

Страница: 31 / 64

22 EKI-5729PI & EKI-5624PI User Manual
3.1 Overview
This section describes the installation procedures for the Advantech EKI Device Con-
figuration Utility.
The Configuration Utility is the software tool for setting up and monitoring the EKI-
5729PI & EKI-5624PI.
3.2 Enabling ProView Function
The configuration of a ProView switch can be accessed by using EKI Device Config-
uration Utility. To install the software utility see “Installing the Configuration Utility” on
page 23.
The ProView features for the device must be enabled. The following guidelines allow
you to enable and disable the ProView features.
To fully access all the available options in the Configuration Utility, administrative priv-
ileges are required. Without the use of administrative privileges, some functions of
the Configuration Utility are not accessible.
Before continuing further, any devices selected for configuration must be connected
and powered on, see “Installation Guidelines” on page 9.
1. From your Windows desktop, locate the Start button to open the Start Menu.
2. Navigate to All Programs > EKI Device Configuration Utility .
3. Locate Advantech EKI Device Configuration Utility and right-click on it.
From the pop-up menu, select Run as Administrator .
See your network administrator to obtain the privileges required.
4. A security screen displays, select Yes to continue.
5. Select Search Again to detect any connected devices.
Once a device is detected, it is listed under the EKI Device listing in the
Tree View .
6. Select the device to configure by clicking on it.
7. Select System tab to bring up the Enable ProView Features field.
Before a device can be configured, the ProView feature must be enabled.
Note! Microsoft Windows 7 is used as a reference for the development of the
following guidelines. The following navigation references may differ
depending on your operating system.