Advantech EKI-1528CI, Руководство пользователя

Страница: 67 / 89

57 EKI-1528-DR Series User Manual
6.5.3 Advanced
The Advanced menu allows for the configuration of the time delay, buffer data size
and FIFO size for port configuration.
Protocol Click the drop-down menu to select the protocol: TCP or UDP.
Data Idle Timeout
(s) Enter a value to define the data idle timeout period.
Data Listen Port Enter a value to identify the channel for remote initiating connections.
Command Listen
Port Enter a value to identify the command listen port for accepting con-
nected request of other network device.
Response Timeout
(ms) Enter a value to define the response timeout period.
Frame Break (ms) Enter a value to specify the frame break time.
TCP Mode Extra Options
Auto Connect To
Peer IP Click the option to connect to TCP/IP which are set at Peers page
automatically after boot up.
Port Data Buffering
Media Click the drop-down menu to select port data buffering type: None or
RAM.
When Data Full Click the drop-down menu to select process mode when data full:
Stop.
Pack conditions (Pack sent immediately when reach 1024 Bytes)
By size Click the option to sent pack immediately by size.
By interval Click the option to sent pack immediately by interval.
By end-character Click the option to sent pack immediately by end-character.
By character-time-
out Click the option to sent pack immediately by character-timeout.
Peer for Receiving Data
Peer Number Click the drop-down menu to select the number of network device
which you want to connect. Maximum is 16 network devices.
USDG Control Mode
Protocol Display the current protocol of the USDG control mode.
Data Idle Timeout
(s) Enter a value to define the data idle timeout period.
Data Listen Port Enter a value to identify the channel for remote initiating connections.
Command Listen
Port Enter a value to identify the command listen port for accepting con-
nected request of other network device.
Hang up Character The default character is “+”. After you have connected to another serial
device via an EKI device, you may need to disconnect, using the com-
mand “+++”. To do this, press “+” three times and wait for the idle time-
out <default value is 100ms>; the device will disconnect. You can set
“Guard Time” to define the idle time.
Guard Time (ms) Enter a value to identify the guard time.
RFC2217 Mode
Listen Port Enter a value to identify the channel for remote initiating connections.
Host Idle Timeout (s) Enter a value to define the host idle timeout period.
Save Click Save to save the values and update the screen.
Item Description