manualshive.com logo in svg

Advantech EKI-1511L, Руководство пользователя

Поделиться
Скачать
Advantech EKI-1511L Скачать руководство пользователя страница 58

EKI-1511L User Manual

47

5.2.6

Exporting and Importing VCOM Mapping

Importing and exporting Virtual COM Port Mapping is useful when the factory has
already used a number of serial device servers in VCOM mode. You can easily
upgrade to a new utility, and don’t need to re-map the Virtual COM Ports. For exam-
ple, when you would like to upgrade from Utility 1.71 to Utility 3.0, you can export
your own mapped Virtual COM Ports in Utility 1.71 and save them as a *.cpm file.

After upgrading to Utility 3.0, import your *.cpm file and restore your own Virtual COM
Ports.

1.

On your desktop, navigate to 

Start

 > 

All Programs

 > 

EKI Device Configura-

tion Utility

 and click 

Advantech EKI Device Configuration Utility

 to open the 

utility.

2.

Locate 

Serial Ports

 menu in the menu pane and click on the Expand icon next 

to Virtual COM Ports to view a list of the mapped ports.

3.

Select a VCOM port.

4.

Click 

Import Virtual COM Port Mapping

 or 

Export Virtual COM Port Mapping

 

in the File menu.

5.3

Running a Diagnostic Test

The loopback test allows you to determine if the EKI-1511L device server is config-
ured correctly to identify any failed nodes in the network. The test allows you to send
a signal from the server and return (looped back) it back to the server.

1.

Connect the loopack connector to a COM port on the EKI-1511L device server.

2.

On your desktop, navigate to 

Start

 > 

All Programs

 > 

EKI Device 

Configuration Utility

 and click 

Advantech EKI Device Configuration Utility

 

to open the utility.

3.

Under Serial Ports, click the expand icon on Virtual COM Ports to view the 
configured port list.

4.

Open the ICOMToolsPlus utility to open the EKI-1511L device server settings.

5.

Set the COM port configuration to match the Port Configuration.

6.

Click the 

Start

 menu.

A successful loopback test incrementally displays the Bytes/sec values on both dis-
played menus.

Note!

This Virtual COM Port Mapping tool can only recover Virtual COM Ports 
that have been mapped previously. For newly installed serial device 
servers, please follow the virtual COM Port mapping steps.

Содержание EKI-1511L
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды