manualshive.com logo in svg

Advantech EKI-1511L, Руководство пользователя

Поделиться
Скачать
Advantech EKI-1511L Скачать руководство пользователя страница 34

EKI-1511L User Manual

23

You can choose from four possible IP Configuration modes --- Static, DHCP, BOOTP,
and DHCP/BOOTP.

Figure 3.11 Network Settings Overview

Item

Description

Static IP

Static IPUser defined IP address, Subnet Mask, and Default Gateway.

DHCP + Auto-IP

DHCP Server assigned IP address, Subnet Mask, Default Gateway, 
and DNS.

BOOTP + Auto-IP

BOOTP Server assigned IP address.

DHCP + BOOTP + 
Auto-IP

DHCP Server assigned IP address, Subnet Mask, Default Gateway, 
and DNS, or BOOTP Server assigned IP address. (If the DHCP 
Server does not respond)

DNS Setting

In order to use DNS feature, you need to set the IP address of the 
DNS server to be able to access the host with the domain name. The 

EKI-1511L

 device server provides Primary DNS Server and Second-

ary DNS Server configuration items to set the IP address of the DNS 
server. Secondary DNS Server is included for use when Primary DNS 
server is unavailable.

DHCP Advanced 
Setting

When you enabling DHCP protocol to get IP address, it will be waited 
DHCP server to give IP within DHCP time out. The default value is 30 
seconds.

Note!

When you have finished the configuration of these settings for each cat-
egory, please press the “Apply” button in order to make these settings 
effective on the Serial Device Server.

Содержание EKI-1511L
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды