EKI-122xR-CE Series User Manual
41
4.1
Overview
An EKI modbus router can be configured through a web interface. By using a stan-
dard web browser, the same procedure as with the Windows configuration utility can
be used. In the browser’s address field, enter the IP Address of your EKI modbus
router. The default IP setting is 192.168.1.1, but you should use the IP which you
have previously assigned for this device. Once the IP is entered, you will be pre-
sented with the following windows.
4.2
Accessing the Web Page
4.2.1
Accessing the Web Page via Configuration Utility
To access the web page via configuration utility:
1.
Select
ETH2
under the desired device.
2.
Click
Launch Browser
.
Figure 4.1 Accessing the Web Page via Configuration Utility
Note!
Before using the web-based configuration, make sure your host PC
Ethernet network IP domain is as same as the modbus router, or it can
establish the TCP connection with the modbus router.
Note!
It is recommended that you use Microsoft Internet Explorer 7.0 or
higher.
Содержание EKI-122 R-CE Series
