Advantech EDG-4508 Скачать руководство пользователя страница 43

Страница: 43 / 140

Chapter 4 Setting Up Single-Host

7. Click on the server name to highlight it. Basic information about the

server’s COM ports will be listed in the right info box.

Note:

The EDG-4508/4516 Manager title bar shows the applica-
tion mode of the newly installed server-Single-Host in this
case.

8. To add another server, choose Add Server Wizard from the Server

menu, or click on the toolbar Add Server icon, and then repeat the
above steps.

9. Before exiting EDG-4508/4516 Manger you should save the new con-

figuration. Choose Save Configuration from the Server menu, or click
on the toolbar Save all Servers icon to carry this out.

10.Exit EDG-4508/4516 Manager when you finish.

Deleting a Server

If for some reason you need to delete a server from your system, click

on the server name to highlight it, and then choose Delete Server from
the Server menu, or click on the toolbar Delete Server icon. A warning
window will pop up asking if you really want to delete the server. Click
OK to delete.

Содержание EDG-4508













































































































































Результаты поиска

Содержание EDG-4508

Отзывы:

Бренды по названию

Популярные бренды

Advantech EDG-4508, Руководство пользователя

Результаты поиска

Содержание EDG-4508

Отзывы:

Бренды по названию

Популярные бренды