manualshive.com logo in svg

Advantech EDG-4508, Руководство пользователя

Поделиться
Скачать
Advantech EDG-4508 Скачать руководство пользователя страница 22

14

EDG-4508/4516  User's Manual

Figure 2-5. Rack Mount

Connecting to the Network

There are two ways to use the 10/100BaseT Ethernet jack located on
EDG-4508/4516 ’s back panel (see Figs. 1-3 and 1-4):

1. For many of the applications using EDG-4508/4516 , you will simply

plug one end of your Ethernet cable into the 10/100BaseT jack, and
the other end into the hub connected to your network.

2. In some cases, such as when configuring drivers and software, you

will find it convenient to hook EDG-4508/4516  directly to your com-
puter’s Ethernet card. To do this you will need to use a “crossed-
cable”, such as the one supplied with your server.

Connecting the Power

After connecting EDG-4508/4516  to your network, you should take the
following steps to connect the power cable.

EDG-4508/4516 ’s power supply is designed to support 90-260V AC,
making it possible for you to use the server regardless of your AC power
supply’s voltage.

Note:

It is strongly recommended that EDG-4508/4516  be con-
nected to the network before turning on the power.

Содержание EDG-4508













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды