www.advantech.com
1 (888) 948-2248
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 1 (815) 433-5100 | Fax: 1 (815) 433-5109
e-mail: [email protected]
Fast and easy on the web:
www.advantech.com
QUICK START
GUIDE
Document Number: 710-11429-00_r1_ABDx-ER-IN50xx_2720qsg
Before you begin, be
sure you have the following:
BB-ABDN-ER-IN5010
Industrial Wireless Ethernet Bridge/Router
+ Wireless Ethernet Bridge/Router Product
(BB-ABDN-ER-IN5010)
+ CD with Airborne
™
Management Center
software
+ 50 Ohm, omni-directional antenna
+ 5-36VDC power for terminal block or
a 5VDC power supply (not included)
LED
Color
Airborne Device State
POWER
Off
Adapter is not powered.
Blue
Adapter is powered.
POST
Off
Adapter is not powered.
Red
Adapter failed Power On Self Test (“POST”) and is not configured for
wireless communication.
Amber
Adapter passed POST but is not configured for wireless network
communication.
Green
Adapter passed POST and is configured for wireless communication.
LINK
Off
Adapter is not powered.
Red / Off
(Periodic Blinking) Adapter is searching for a valid network
(Access Point) that matches device’s configuration.
Green
Adapter has successfully associated with an Access Point.
COMM
Off
If Power LED is also Off, then Adapter is not powered.
If Power LED is On then, No TCP session from WLAN or Ethernet
interface has been established.
Red /
Blinking
Red
A TCP connection has been established.
If your device is connected and configured correctly, you
will see the following LED Status:
COMM: Red / Blinking Red
LINK:
Green
POST: Green
POWER:
Blue
(Continued)
Check Your Setup
7
Troubleshooting
8
Recommended Accessories
120VAC / 5VDC Power Supply
Model# BB-MDR-20-24
or
Power Supply
with appropriate cord
(North America, EU, UK)
Model# BB-PS-WDS
Ethernet Cable
Model# BB-C5UMB10FBG
