Advantech AVAS-402, Руководство пользователя

Страница: 19 / 25

If you are presented with the opening screen of a setup or installation program,
follow the instructions on screen. The setup program will guide you through
preparation of your hard drive, and installation of the operating system.
2.5 Installing the Drivers
After installing your system software, you will be able to set up the Chipset,
Graphics, Ethernet, and Audio functions from your own external CD-ROM drive.
All the drivers can be downloaded via Advantech official website.
The standard automatic installation procedures for installing the Chipset,
Graphics, Audio, and Ethernet are described in Chapter 3.
Troubleshooting
When system behaves abnormally, such as:
1. Failure to power on
2. Failure to power off
3. AC power in and all switches ON, but system doesn't power on
Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:

Product name and serial number



Description of your peripheral attachments



Description of your software (operating system, version, application software,
etc.)



A complete description of the problem



The exact wording of any error messages



Symptoms, photo or video if available.

Guidance
and Manufacturer’s Declaration – Electromagnetic Emissions
Emissions Test Compliance
Electromagnetic Environmental
Guidance
AVAS-402 uses RF
RF emissions
energy only for its internal function.
Group 1
Therefore, its RF emissions
CISPR 11 are very low and are not likely to
cause any interference in nearby
electronic equipment.
RF emissions
Class B AVAS-402 is suitable
CISPR 11
for use in all establishments,
Harmonic emissions
Class A
including domestic establishments
IEC 61000-3-2 and those directly connected to
the public low-voltage power sup-
Voltage fluctuations/
ply network that supplies buildings
flicker emissions Not applicable
used for domestic purposes.
IEC 61000-3-3
Recommended Separation Distances Between
Portable and Mobile RF Communications Equipment and the AVAS-402
AVAS-402 is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the model AVAS-212 can help
prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the model AVAS